Back| Back |
WEBER DGAV | W WEBER |
Due to variations in the DGAV range parts may vary to the
illustration depending on carburettor application
Repair kits are available which contain gaskets, seal, diaphragms and
needle valve. Some of the other parts are available separately. Please
state carburettor reference (stamped on flange) number or make and model
of car, any questions please contact us.
| Illus No: | Description | Illus No: | Description |
|---|---|---|---|
| 1 | Top assembly | 12 | Bi-metal choke housing |
| 2 | Fuel filter | 13 | Choke assembly |
| 3 | Power valve diaphragm | 14 | Choke pull-down diaphragm |
| 4 | Float | 15 | Idle mixture screw |
| 5 | Needle valve | 16 | Throttle stop screw |
| 6 | Top gasket | 17 | Emulsion tube |
| 7 | Main jet | 18 | Accelerator pump jet |
| 8 | Main body | 19 | Air correction jet |
| 9 | Primary idle jet and holder | 20 | accelerator pump check valve |
| 10 | Accelerator pump diaphragm | 21 | Low vcuum enrichment valve |
| 11 | Accelerator pump gasket | 22 | Secondary idle jet and holder |
e-mail :sales@gowerandlee.co.uk
Tel/Fax +44 (0)1923 247300
