 Back |
|
DELLORTO | |
DHLA
| Illus No | Description | Illus No | Description |
|---|---|---|---|
| 1 | 48/45 Choke tube | 52 | Pump jet holder |
| 2 | 40 choke tube | 53 | Pump jet filer/spring |
| 3 | 45/48 Aux venturi | 54 | Pump jet O ring |
| 4 | 40 Aux venturi | 55 | Pump jet cap fibre washer |
| 5 | Main jet | 56 | Air bleed screw |
| 6 | Idle jet | 57 | Air bleed screw O ring |
| 7 | Pump jet | 58 | Vacuum blanking screw |
| 8 | Stater jet | 59 | G/H prog. blanking screw |
| 9 | Main emulsion tube | 60 | Mixture screw |
| 10 | Starter emulsion tube | 61 | Mixture screw spring |
| 11 | Air corrector | 62 | Mixture screw washer |
| 12 | Idle holder/emulsion tube | 63 | DHLA late Alfa lever |
| 13 | Needle valve | 64 | DHLA throttle stop screw |
| 14 | Throttle butterfly | 65 | Spindle nut |
| 15 | float assembly | 66 | spindle nut lock washer |
| 16 | Choke piston cover bolt | 67 | Short Lotus lever |
| 17 | Choke piston spring | 68 | Spindle end cover |
| 18 | Choke piston | 69 | Spindle washer |
| 19 | Choke outer cable clamp screw | 70 | Spindle bearing |
| 20 | Choke cable support | 71 | Pump rod spring |
| 21 | Top cover | 72 | Pump cover assembly |
| 22 | Top cover gasket | 73 | Pump rod nut |
| 23 | Needle valve filter |
74 | Pump rod lock nut |
| 24 | Vent cover screw | 75 | Diaphragm spring |
| 25 | Vent cover | 76 | Pump diaphragm |
| 26 | Top cover screw | 77 | Spring washer(pump cover) |
| 27 | Spring washer | 78 | Screw (pump cover) |
| 28 | Vent cover gasket | 79 | Alfa carb/inlet gasket |
| 29 | Choke cable inner clamp | 80 | Pump non-return valve |
| 30 | Choke clamp washer | 81 | Pump body gasket |
| 31 | Choke cable clamp nut | 82 | DHLA45E pump body |
| 32 | Choke cable return spring | 83 | Pump body screw |
| 33 | Choke spring cup washer | 84 | Butterfly screw |
| 34 | Spring washer | 85 | DHLA48 choke retaining screw |
| 35 | Choke spring retaining nut | 86 | Spring washer (choke screw) |
| 36 | Choke actuator cam | 87 | Trumpet stand |
| 37 | Actuator cam | 88 | Throttle return spring |
| 38 | Actuator cam retaining bush | 89 | Pump rod clamp screw |
| 39 | choke actuator lever | 90 | DHLA40 pump rod assembly |
| 40 | Needle valve washer | 91 | Ventri grub screw |
| 41 | Float assy pivot pin | 92 | Split pin |
| 42 | Banjo fibre washer (inner) | 93 | Balance lever pin |
| 43 | Fuel banjo (single) | 94 | Balance lever spring |
| 44 | Fuel banjo (double) | 95 | Late Alfa balance lever |
| 45 | Banjo fuel filter | 96 | Balance lever pin |
| 46 | Banjo fibre washer (outer) | 97 | Throttle stop screw |
| 47 | Banjo bolt | 98 | Throttle stop screw spring |
| 48 | O ring | 99 | Washer |
| 49 | Cap screw | 100 | Lotus balance lever |
| 50 | Pump jet weight | 101 | Spindle |
| 51 | Pump jet ball bearing | 102 | Gasket kit (2 carbs) |
Most parts are available separately. Repair kits, service kits and gasket packs are also available, please state carburettor reference number & make and model of car, any questions please contact us at.
e-mail :sales@gowerandlee.co.uk
Tel/Fax +44 (0)1923 247300
